Connecting 3D/360° Virtual Tour Buyers to Service Providers powered by
the Most In-Depth, Relevant and Up-to-Date Content and Training for the 3D/360° Community
Join FREE! 50+ Benefits
Option #1 - Find a 3D Tour Photographer Map
We Get Around Network Find a Pro Service
Matterport Service Provider? Join We Get Around Network
Option #2 - Book a Matterport Pro in 60 Seconds
We Get Around Network Instant Booking Service
Powered by Koaware. Matterport Service Provider (USA)? Join KoaWare Free! Register Now
Last 30 Days: 49,088 Page Views | 12,535 Visitors | 70 New Members
WGAN Knowledge Base | Total Posts: 61,422  |  Total Topics: 9,549
5,296 WGAN Members in 129 Countries
We Get Around Network Forum
WGAN-TV Training U in Matterport
WGAN-TV Channel
CAPTUR3D Training for Matterporters: Part 5 of 5
with Phoria (CAPTUR3D) COO Steven Kounnas
WGAN-TV Training U
21 Subject 'Matter' Expert Instructors
30 Courses | 12 Major Topics
Training via Recorded Videos
More Info WGAN-TV Program Schedule | Need Help? | Podcast

Lighting Techniques for inside475

Wonderdawg private msg quote post Address this user
I'm ready to pull the trigger on ordering a Matterport unit - in my due diligence, I'm concerned with white balance on some of the examples I've seen. Interiors such as fluorescent (yellow) and ambient (blue cast). Is there a way to set the camera's white balance? I've seen beautiful white walls and would like to know if there's a way to ensure that every time prior to scanning... Does a white card help on the first scan?
Post 1 IP   flag post
JohnBecker private msg quote post Address this user
Nope, no way to control white balance. And you can't use a gray card (or white card) because it'll be visible in your model.

You get what you get. It pays to manage clients' expectations.
Post 2 IP   flag post
ron0987 private msg quote post Address this user
Color balance has been an issue, since there is three cameras the software blends the three photos and balances the color, in most cases is does a good job. But there are a few instances where the color is off and even Matterport support cannot control it. I have found in low light areas the color is far better, in bright areas I have found a color issue more often.

Post 3 IP   flag post
ron0987 private msg quote post Address this user
Wonderdawg just like John said there is no control for color.

Post 4 IP   flag post
WGAN Forum
DanSmigrod private msg quote post Address this user
@Wonderdawg @JohnBecker

If Matterport sets the white balance based on the first scan, then a white balance scan would work; just deactivate the first scan in 3D Showcase.

@Wonderdawg how about asking Matterport Support and let us know?

Also, our 'wish list' threads to MP include white balance control.

Seems like a button when uploading for processing: shot in a home; office or outdoors.

Post 5 IP   flag post
Wonderdawg private msg quote post Address this user
Thanks all - Per Dan, I went to the Support page and here is the answer -

"The Matterport camera works best in an area with consistent, interior light sources.

Avoid sunlight, for a few reasons:
Sunlight contains a large amount of IR (infra-red) light. Since the camera's sensors use IR to record depth data, sunlight can easily confuse the camera. This results in scanning problems such as failed alignment, or holes in the mesh (seen in Floorplan and Dollhouse views).
Sunlight also usually varies from interior lights in terms of light temperature. This result in white walls appearing blue-ish near bright windows, and is a result of varying light temperatures.

Instead, whenever possible, use available interior lights, and close blinds/drapes to avoid bright sunlight (or scan when less sun is coming through windows).

In rare cases, you may see bands of light in your models -- this is due to the lighting's frequency. To prevent this, keep your camera's firmware current.

Regarding white balance, hue, and other factors, the Matterport system automatically applies HDR, white balance, and other image processing during the capture process. These processes are optimized to provide good results across a variety of conditions, but cannot be manually adjusted or otherwise controlled. Similarly, any panorama imagery is not editable."
Post 6 IP   flag post
ron0987 private msg quote post Address this user
I understand what you are saying about the first scan and using a grey scale to set the WB but with wide range of areas covered I do not see that working. Because if you set it for a Kitchen that could have fluorescent, halogen and or led lights then move to an area that has incandescent or natural light which would again throw the balance off. I think that overall it is good. But I have noticed this being an issue when I moved from natural lighting into a room that has florescent or incandescent lighting. I have sent Matterport a request to review and respond to the issue. They have reported they are aware of the problem and are trying to address it but because the camera is used over such a large platform of lighting it is not an easy task to blend all for a great out come. They are aware of the issue. That is just my thoughts, if they would use a Nikon camera as a base model camera that would resolve all the issues!!!!!

Post 7 IP   flag post
62175 7 7
This topic is archived. Start new topic?