"Wish List" for Matterport Workshop

DanSmigrod

55

6 daysDanSmigrod (23401): Open thread to view post.

Did I miss this update for Matterport Slide show?

ron0987

3

6 daysDanSmigrod (23401): https://youtu.be/F0xFG_PnWCUVideo: Matterport ShopTalk #9 | New Features and Updates & Part 2 of Customizing your Model | Video courtesy of Matterport YouTube Channel | 14 October 2020 @ron0987 From the Matterport video above (14 October 2020) at 46:18, Matterport Chief Software Architect Haakon Erichsen says: All right. I have another one that is actually from last time I was at [Matterport] ShopTalk [webinar]. I talked about some new...

Video: Matterport to Add (Much Improved) Blur Tool to Matterport Workshop

DanSmigrod

3

6 daysDanSmigrod (23401): https://youtu.be/F0xFG_PnWCUVideo: Matterport ShopTalk #9 | New Features and Updates & Part 2 of Customizing your Model | Video courtesy of Matterport YouTube Channel | 14 October 2020 @lilnitsch Technically, sounds like new Matterport blur feature in Workshop ("coming soon") can be implemented in all Matterport spaces: regardless of how or when they were created. "All right, and I'll take one about blur. A couple...

Video: New Matterport Features & Updates & Part 2 of Customizing your Model

DanSmigrod

8

8 daysron0987 (1507): So is there a timeline on release. I just uploaded a model and the window pop up asking to automatically blur is no longer there. So in the past a feature is advertised and it months to years to be released. I did not see the MP update release so was there anything on the release date?

Transcript: (Matterport Webinar) Customizing Your Matterport Model: Part 1

DanSmigrod

1

24 daysDanSmigrod (23401): https://youtu.be/EXQqBXh0I1AVideo: Matterport ShopTalk #8: Complete Account Overview & Customizing your Model Video Courtesy of Matterport YouTube Channel | 1 October 2020 Hi All, This Matterport ShopTalk #8 Webinar was held on Wednesday, 30 September 2020. Speakers Amir Frank Matterport Marketing Content Manager Holly Brunk Matterport Head of Customer Success Your thoughts? Best, Dan Transcript (Video...

Video: Understanding Matterport Mesh View; Keyboard Tips for Matterport

DanSmigrod

1

3 monthsDanSmigrod (23401): https://youtu.be/XZ5hiI9AG6MVideo: Matterport's Brand New Configurable Highlight Reel Tool | Video courtesy of Matterport YouTube Channel | 5 August 2020 Hi All, In this video (above), Matterport Content Marketing Manager Amir Frank gives keyboard tips for using Matterport and additional insight: ✓ Mesh View ✓ Dollhouse View ✓ Measurement Model ✓ Workshop ✓ Tool Panel Below is a transcript of the video. Questions...

Change default Zoom Level

mori

1

3 monthsmori (775): Is there any way to change the default zoom level for a Matterport tour?

How to position an outdoor 3D View in Workshop to connect to indoor Tour?

hamid167

2

3 monthsDanSmigrod (23401): Video: WGAN-TV Matterport Workshop 3.0 Part 2 of 5 Short Story #626- Positioning 360 Views with Matterport Content Marketing Manager Amir Frank @hamid167 About if i capture 3D scan from outdoor of building ... outside, you likely want to shoot a Matterport 360 View (that's different than a Matterport 3D Scan). Then, in Matterport Workshop, you can position the 360 View anywhere that you would like. The WGAN-TV Short Story (#626...

Video: How to position and rotate a 360 View in Matterport Workshop 4.0

DanSmigrod

1

5 monthsDanSmigrod (23401): WGAN-TV Matterport Workshop 3.0 Part 2 of 5 Short Story #626- Positioning 360 Views with Matterport Content Marketing Manager Amir Frank Hi All, In this WGAN-TV Story Story (626, above), Matterport Content Marketing Manager Amir Frank shows: ✓ how to position a 360 View in Matterport Workshop 4.0 ✓ how to rotate a 360 View ✓ how the GPS in a Matterport Pro2 3D Camera might work in the future to help place 360 Views What...

Newbie Matterport Question - 360 View Labels Placement Wrong

OutermostImaging

6

5 monthsOutermostImaging (4): @HomePlanNZ @Wingman Thank you both for your input. I've tried rotating and adjusting the label position and zipping back to the other to see if it made a difference and I could not find any (but I'm new so much to learn). I did speak to Matterport support late today and they confirmed it was a bug. It was one that they had see before and thought they had squashed but evidently is back (their words). They said that they would follow-up with...

How to control the direction of panning within Matterport Highlight Reel?

DanSmigrod

1

5 monthsDanSmigrod (23401): Video: WGAN-TV Matterport Workshop 3.0 Part 5 of 5 Short Story #720- Possible Adjustments For Panning Hi All, Has Matterport enabled control pan left/pan right within the playback of a Matterport Highlight Reel? In this 11-month old WGAN-TV Short Story (#720 above), Matterport Content Marketing Manager Amir Frank, 3D RoomScapes Founder Ross Zanzucchi (@rzphotoman) and I discuss how - Highlight Reel - the playback moves in the...

Heads up! Workshop on the Ipad coming Next Monday - EDIT YOUR SPACES ANYWHE

3dshowcaseuk

5

5 monthsDanSmigrod (23401): https://forum.we-get-around.com/cached/760e018aa2a5e2780f23262f10d395a8.pngMatterport eBlast received Friday, 15 May 2020 Matterport Learn More Link

Matterport Workshop Highlight reel functions inactive

rzphotoman

6

6 monthsron0987 (1507): Shocker, maybe Matterport is still reading the blog, once I posted my last statement I get a second email from support asking me if I can use another computer to resolve the issue. After being told the support request was going to be moved to a higher level, it sound like I am dead in the water with this computer. Three years ago I invest just under $3000 for the best computer at the time and right now it still out preforms most computers to...

WGAN-TV Training U: 8 of 30 Courses in Matterport Workshop 3.0

DanSmigrod

3

1 yearDanSmigrod (23401): Hi All, Weekend is a great time to watch WGAN-TV Training U ( in Matterport) courses. Best, Dan

CUPIX Runs Circles Around Matterport in 3D Tour Annotation

DanSmigrod

3

1 yearJoakim360 (123): Example 3D Tour showing promotion video on TV-screen

MAttertags has been lost

alirizacil

3

1 yearalirizacil (135): Exactly :) Thanks Dan.

Tip: How to do a SnapShot without Matterport MatterTags being Visible

DanSmigrod

2

1 yearDanSmigrod (23401): Hi All, This question came up today; so, moving this to the top for others ... Dan

WGAN-TV Training Academy: Matterport Workshop 3.0 Training - All 5 Episodes

DanSmigrod

7

1 yearPolyCan (17): Thanks, Dan. So much valuable info here.

Eight Matterport Workshop 3.0 Tutorial Videos from WGAN Members

DanSmigrod

3

1 yearDanSmigrod (23401): https://forum.we-get-around.com/cached/d59d6f5648e0321de7e6db4b2aeeb9ef.png Hi All, I received this eBlast from Matterport this morning (Tuesday, 2 July 2019). Have you already made the switch to Workshop 3.0 or are you still working in Matterport "Legacy Workshop"? Best, Dan P.S. Some helpful resources to switch to Matterport Workshop 3.0 from Matterport "Legacy Workshop" ... ✓ WGAN-TV Training Academy: Matterport...

Matterport Workshop 3.0 is Now the Default; Legacy Workshop Still Available

DanSmigrod

2

1 yearDanSmigrod (23401): Hi All, Some helpful resources to switch to Matterport Workshop 3.0 from Matterport "Legacy Workshop" ... ✓ WGAN-TV Training Academy: Matterport Workshop 3.0 Training - All 5 Episodes ✓ Eight Matterport Workshop 3.0 Tutorial Videos from WGAN Members ✓ WGAN-TV Training Academy: 60+ Hours: Matterport Scanning/Workshop 3.0/More! ✓ WGAN Forum discussions tagged: Training Dan

How to watch over-the-shoulder of a Pro Edit a Matterport in Workshop 3.0

DanSmigrod

6

1 yearDanSmigrod (23401): Hi All, The series of WGAN-TV Matterport Workshop 3.0 Training Videos - "the over-the-shoulder" videos by WGAN Members - are now available exclusively via the WGAN-TV Training Academy. Special Offer for WGAN Forum Members ✅ Save 50 percent on the WGAN-TV Training Academy. ✅ Private Message me for your Promo Code ✅ Join WGAN Forum ( free) Join Here | Receive 50+ Membership Benefits (free) Instantly (look for...

Matterport Highlight Reel Training with Rockland, Maine Pro Dave Clough

DanSmigrod

1

1 yearDanSmigrod (23401): WGAN-TV Training Academy: Matterport Highlight Reel Training with Rockland, Maine Photographer Dave Clough (@oskadave) with Dave Clough Photography https://my.matterport.com/show/?m=qbkokYoVGS7Matterport 3D Tour by Dave Clough. This is the Matterport 3D Tour that Dave edits in the training video above. https://my.matterport.com/show/?m=LotsWPn6qjMMatterport 3D Tour by Dave Clough. This is the Matterport 3D Tour that Dave references at...

Matterport Workshop 3.0 Training with UK-Based Imagineer Angus Norriss

DanSmigrod

1

1 yearDanSmigrod (23401): WGAN-TV Training Academy: Matterport Workshop 3.0 Training with Peterborough, England-Based Imagineer Angus Norriss (@AngusNorriss) https://my.matterport.com/show/?m=MDcK4fida9n( Matterport Link) Matterport 3D Tour by Angus Norris. This is the Matterport 3D Tour that Angus edits in the video above. [mpembed]https://mpembed.com/show/?m=MDcK4fida9n&mpu=88[/mpembed]( MPEmbed Link)Matterport 3D Tour by Angus Norris. This is the...

How to add a 360 View to the Highlight Reel in the new Matterport Workshop

DanSmigrod

5

1 yearfotoguy (659): I don't understand dragging it to the map? When I try to drag, it changes the view. What am I missing?

360 and Walkthrough graphic in new workshop

BlueImmersiveMedia

1

1 yearBlueImmersiveMedia (270): In the new workshop. How do you disable them? They are ugly.

Is there a way to place cut marks in Workhop?

Thea_VR

4

2 yearsWingman (1461): I once tried to put cut lines all around a house and it removed most of reflections. Basically it was just an outline of the house created with Matterport cut lines.

All Matterport Tours Automatically Update to new Showcase/Workshop 1 Jun 19

DanSmigrod

4

2 yearsRomainReparage (129): Editing is much much faster. i will not go back

Matterport Newsletter: Now Available-Next version of Showcase and Workshop!

DanSmigrod

2

2 yearsosakadave (80): I have been very happy with the beta version. Streamlined and efficient I have not experienced any downside as others have reported. I like the build as you go Highlight Reel, seeing all scans in a list, I do not miss the overall wonkiness of navigating with old system.

New Matterport Workshop -UGH

BlueImmersiveMedia

4

2 yearsHarlanHambright (1817): Maybe I'm missing something but I'm quite happy with all the new MP developments, especially how far you can align in Capture now, and successfully in sunlight sometimes like never before. Workshop's still in transition.

10 Tips for Capturing Quality Scans with Matterport

DanSmigrod

6

2 yearsWingman (1461): Number 7 is bad if a bedroom has a built in wardrobe with sliding mirror doors. If you keep the doors closed you will have one wall covered with a huge mirror. If you hide one door(slide it in behind the other) you at least have some space in a small bedroom where you can place a camera without it being reflected in a door mirror

Matterport + HomeSnap

DanSmigrod

2

2 yearsMetroplex360 (9290): I would imagine that it is because the Matterport Space was submitted via the MLS virtual tour field. This news was originally announced in October.

Matterport Workshop Public Beta 3.0

DanSmigrod

2

2 yearsQueen_City_3D (2632): It's essential for snapshots to be possible on the Workshop 3.0 and until that happens its frustrating switching back and forth, and so I'll likely live in the past with the old workshop for all features except for 360 image placement which is only possible in the beta.

Tip: Adding a YouTube Videos (unbranded) to Matterport Highlights Reel

DanSmigrod

3

2 yearsMetroplex360 (9290): @Kentabor The user will click on the thumbnail in the highlight reel.

Training: Matterport Cloud & Matterport Workshop Short Story #174 Overview

DanSmigrod

2

2 yearsDanSmigrod (23401): Hi All, Just got a Matterport Camera? Seeking training for Matterport scanning and post production (Matterport Workshop)? Join as a WGAN Fan Club Member and receive an All Access Pass to the WGAN Training Academy Library. Or, for one-on-one training, either see the Find a Matterport Pro Map (above) or Private Message me for an intro to a Matterport in your area that can do one-on-one training. Happy New Year, Dan

Free Video of your Matterport Tour + ...

tresdepro

2

2 yearsHome3D (2350): I'm an enthusiastic user now of Colin Forte's photo processing service, so the idea of outsourcing certain tasks is very attractive. I watched both the MP tour and the video. Not very impressed with the latter. Lots of jitters and dropped frames. Would not consider this service unless the video was as smooth as the live MP tour. Just a pointer for MP2EDIT. I've made videos like this using screen capture (not ideal, but at least I know how)...

How to turn off Matterport blue circle?

angusnorriss

4

2 yearsangusnorriss (720): Good man! Thank you. I hope you are well. Hopefully more tours coming your way.

Video: A Taste of a Nearly 2 Hour Training Video on Matterport Workshop

DanSmigrod

1

2 yearsDanSmigrod (23401): WGAN-TV Matterport Cloud and Workshop for Newbies #179-Plan View And Highlight Reel Hi All, Above is a video segment from my nearly 2-hour WGAN-TV Matterport Cloud and Matterport Workshop for Newbies training video. To get an All Access Pass to the WGAN Training Academy Library - 250+ hours - simply join as a WGAN Fan Club Member. (The All Access Pass is also included in WGAN Basic, Standard and Premium Memberships.) Best, Dan

New-Outsource Editing of Matterport Tours in Matterport Workshop to MP2EDIT

DanSmigrod

1

2 yearsDanSmigrod (23401): https://forum.we-get-around.com/cached/8955376e256c6104547c87f3c4bc2e46.png Screen Grab: MP2EDIT editing a Matterport 3D Tour for We Get Around Network -- New! Outsource Editing of Matterport 3D Tours in Matterport Workshop to MP2EDIT Hi All, Would you like more time to scan, develop new business or spend time with friends and family? Outsource editing of Matterport 3D Tours in Matterport Workshop to MP2EDIT. For as low...

WGAN-TV: Matterport 101 Training for Newbies

DanSmigrod

1

2 yearsDanSmigrod (23401): Hi All, If you are thinking about getting started with Matterport - or have done less than 10 Matterport 3D Tours - it's likely that you are thinking about what training is available to help you succeed faster. 1. Engage a Matterport Pro - ask to watch both the scanning and post production 2. Need a Corporate Trainer for Matterport? Private Message me for a free referral 3. WGAN-TV has 250+ hours of videos. These five (5) WGAN-TV...

Question of the Day: Got a tip for using Matterport Workshop?

DanSmigrod

2

2 years808virtually (127): Take a patience pill.

How do I exclude scans uploaded to GSV from Matterport?

Jamie

4

2 yearsJamie (1848): So here is some information from Paul from matterport, this helps clear it up https://support.matterport.com/hc/en-us/articles/115006844048-FAQ-Google-Street-View clickable text

Re-naming floors in workshop

rzphotoman

3

2 yearsrzphotoman (1487): Thanks again Danny...maybe I should just hire you.

Matterport Workshop Questions-How to change HERO Picture?

Mikey

4

2 yearsDanSmigrod (23401): Using WP3D Models WordPress Plugin to set the Hero image is great for using a 2D exterior shot such as a digital twilight. I am surprised that Matterport does not enable uploading a custom hero image. Best, Dan

How to Measure within Matterport Workshop

DanSmigrod

1

2 yearsDanSmigrod (23401): WGAN-TV Matterport Cloud and Workshop for Newbies Short Story #181-How to Measure within Matterport Workshop Hi All, ✓ Thinking about buying a Matterport camera? ✓ Just getting started with Matterport? You might be wondering how to measure within Matterport Workshop and some measuring tips. This video (above) - WGAN Short Story #181: How to Measure within Matterport Workshop - is from the two-hour WGAN-TV Training Academy...

Frustrating post-production in Workshop: anyone else feels the same?

ELAN42

1

2 yearsELAN42 (125): That's my point: https://support.matterport.com/hc/en-us/community/posts/360017068254-Why-Scan-number-in-Worskhop-is-different-from-Capture-?page=1#community_comment_360002144974 Inside Workshop Scan number always change if you go back to the place, delete some scans, and re-process the Space. This is a very stupid thing to do, why not using same numbers as the Capture applications ? It's so frustrating to search every time for Scans...

Showcase Dollhouse not working in tour mode.

PointCloudVR

1

2 yearsPointCloudVR (106): I'm trying to use the dollhouse to jump floors in a Matterport tour . None of the dollhouse views show up in the highlight reel. Anybody else having a terrible time in the workshop today?

Tip: How to Change the Name of a SnapShot in Matterport Highlights Reel

DanSmigrod

1

2 yearsDanSmigrod (23401): WGAN-TV Short Story: Matterport Cloud and Workshop for Newbies #184-How to Edit the Name of the SnapShot in the Highlights Reel Hi All, When you create a Matterport Highlights Reel, would you like to name the SnapShots - Bedroom 1, Bedroom 2, etc. - instead of using the default date and time? In this WGAN-TV Short Story #184 (above) - less than 4 minutes - I demo: ✓ how to change the name of SnapShots ✓ how to download some or...

Walk-through Only, no Dollhouse, no floor plans, no photos needed.

BlueImmersiveMedia

9

2 yearsDanSmigrod (23401): @BlueImmersiveMedia Thank you for the additional backstory. Since it sounds like you want a tour - not necessarily with the dollhouse view - you might use: ✓ 360º photo spheres shot with a Ricoh Theta V or other 360º 1-click camera Use one of these platforms: ✓ CUPIX - 3D Tour like Matterport, without the dollhouse view (need to shoot 360ºs closer together) ✓ ThreeSixty Tours - you can shoot 360ºs anywhere: they don't need to be...

Matterport Workshop Workflow Tip: Hide scans before taking SnapShots

DanSmigrod

1

2 yearsDanSmigrod (23401): WGAN-TV Matterport Cloud and Workshop for Newbies #176-Workshop Workflow with WGAN Founder Dan Smigrod Hi All, If you are just starting out with Matterport, when you begin Matterport Workshop Workflow, start with hiding scans. Then, when you go to create SnapShots you will NOT be able to take a SnapShot when the scan is hidden. I explain why that's a good thing in this WGAN-TV Short Short (#176). This 5 minute video (above) is from...

Question of the Day: Will you place 360º Views in Matterport Workshop?

DanSmigrod

3

2 yearsHome3D (2350): I haven't tried the new Workshop placement system, but thought I would chime in on the past beta for placing external 360's in the model. The idea is great, but it's clunky and I've abandoned using it so far, for a different reason. In the past you have had to elect to engage the "new version" of showcase in order to add 360's. My problem is that I vastly prefer the "walkthrough" mode of the old showcase over the new...

Public Beta: Place 360º Views in New Matterport Workshop Week of 4 Sept 18

DanSmigrod

4

2 yearsDanSmigrod (23401): https://forum.we-get-around.com/cached/277a1ed6b647ae98b796e86076d24436.png https://forum.we-get-around.com/cached/fe15b4ff99e4e3e0422b84a565d06d35.png https://forum.we-get-around.com/cached/55edbb28017254c56df7369c5480477e.png https://forum.we-get-around.com/cached/5b3d1da83b78ab270214d5a75a7d16d2.png Links: ✓ Place your 360º Views in the Capture App ✓ Place your 360º Views in Workshop ✓ Matterport Blog: (4 Sept. 2018) 360...

Measurements in Matterport Showcase instead of Matterport Workshop?

DanSmigrod

10

2 yearsJuMP (1324): Hello All, JuMP team had released a POC (proof of concept) long time ago with the function of in showcase measurement. https://forum.we-get-around.com/topic/6201/page/1/new-in-december---cupix-review/#7 In this POC you can use mouse right key to measure within the showcase anytime. >>1st click to set the start point; >>2nd click to set the stop point and get the result; >>3rd click to start a new measure... ...

Matterport snapshot aspect ratio

Queen_City_3D

5

2 yearsQueen_City_3D (2632): @Expertise Only problem is that I take the snapshot when I have the room framed as best as possible, and so I would have to guess what part would be cropped. As an FYI to anyone who's commented on this thread, here's what Matterport Support got back to me with: ----------------------------------------------------------------------------------------------------- "Thanks for contacting Matterport Support. We do not currently have an...

Question of the Day: Do you prefer Matterport Slide Show or Walkthrough?

DanSmigrod

28

2 yearsBlueImmersiveMedia (270): @DanSmigrod Thank you! I knew I wasnt thinking about the GSV with slideshow correctly. I was thinking the actual walkthrough was posted to GSV, not the 360 images for self guided walk-through. Thanks again!

WGAN-TV How to Use Matterport Cloud and Workshop for Newbies

DanSmigrod

6

2 yearsDanSmigrod (23401): WGAN-TV How to Use Matterport Workshop and Matterport Cloud for Newbies with WGAN Forum Founder Dan Smigrod Hi All, This video is viewable by WGAN Basic, Standard and Premium Members. (For your All Access Pass to view this video and all WGAN-TV Training Academy Library videos, please see your Welcome Onboard Letter. In this nearly two-hour show today, I walk you through every feature of Matterport Workshop and Matterport Cloud. Plus,...

Limit a tour's zoom?

BrianM

6

2 yearsRPOceanic (214): FYI: Another option.... if you use WP3D Models plugin, there is a check box under options tab to turn off/on the zoom feature.

WGAN-TV Schedule: August 2018

DanSmigrod

1

2 yearsDanSmigrod (23401): https://forum.we-get-around.com/cached/60565d8732940ac823931c4736c73c4a.png Hi All, WGAN-TV Live at 5 (5 pm EDT | GMT -4) Programming Schedule | August 2018 ✓ Wednesday, 15 August - How to Use Matterport Workshop for Newbies with WGAN Founder Dan Smigrod ✓ Thursday, 16 August - CUPIX White-Label Player with CUPIX Director of Sales Scott Anderson ✓ Wednesday, 22 Aug - Bluetooth Beacons Meet 3D Tour Marketing with Allan...

WGAN Forum Question of the Day: Index and Tag

DanSmigrod

2

2 yearsDanSmigrod (23401): Hi All, New to the WGAN Forum? Here's are Questions of the Day to give/get help ... Join the discussion :beer: Best, Dan

new features in workshop,skewed perception

ajabba

2

2 yearsQueen_City_3D (2632): Not sure about the perspective question, but yes, there was an update of automated snapshots being provided. I like the concept but so far it's been more work than less to go through to see which, if any, of Matterport's snapshots I'd want to keep. When I create a highlight reel I typically start at the front door and navigate through the house going room by room in a path that makes sense. If I were to use the provided snapshots I'd have to...

Question of the Day: One thing you would change about Matterport Workshop?

DanSmigrod

10

2 yearsNetworker (157): WGAN Pros, How about the ability to change the colors of the white circles on the floor. Hence, maybe blue circles on a white marble tile floor? Now that would tell me we have some forward thinkers over there in CA.

Keep Matterport tour private and get a floor

Chi3d

13

2 yearsPer952 (16): Thats why I mentioned that its important to get a good reference measurement. I use a laser on the longest distance I can get inside the property and put the plan in scale according to that exact measurement. Like that I think you get the most exact plan possible.

Detail Info Disappeared

lcorbett

4

2 yearslcorbett (43): Thanks Dan and JuMP. It's weird, I only see it missing when I'm using Google Chrome. It looks like it did before when I use Explorer... I also can't find the links to the scans using Chrome, but can find them in Explorer. I just checked it again so I am not sure if they were doing updates it seems to be okay on Chrome now. Thank you for you prompt response!

Matterport Model Trimming Issue

Networker

7

2 yearsDanSmigrod (23401): @Networker That's super-kind (and much appreciated). While we started out as the Matterport User Group Forum (MUG) in August 2014, we quickly realized that while we are Matterport centric, Matterport Service Providers - and those researching Matterport - were (and continue to be) interested in Matterport competitors to either: ✓ make a decision to buy Matterport faster ✓ make a decision to buy a different camera and/or...

How the Window Trim Tool Saved My Life

DanSmigrod

8

2 yearsTosolini (3388): @dansmigrod I'm not sure what's the best solution to make lots of tags fit. Baking the labels in the image (through drawing / post-it notes) is one way (as suggested by @Shakoure). The absence of labels on tags invites the user to discover what they are, but there is only so much exploration that we can ask users to do before they move on. Customizable tags might be another way. Today we can only choose a color, tomorrow we might be able to...

Outsource Matterport Workshop Services

DanSmigrod

9

3 years[redacted] (16): Hello Brian, I am sorry we apparently missed each other in our communication. You placed your order at 10:50 am EST on April 18th. I emailed you at 11:07 am EST on April 18th advising you that I had not received a collaborator invite to your scan and to please invite me. I did not hear back from you in this regard. As I look at the email I sent you now, it appears that I had a misspelling in my email and that would explain the lack of...

Matterport AI Generated SnapShots?

DanSmigrod

2

3 yearsMetroplex360 (9290): Funny... I can imagine the same thing.

Dollhouse: Delete or Hide Scans (and why)?

DanSmigrod

2

3 yearsBiggles (43): Dan I scan as much as I can, even areas I don't want in the walk through later on. The important thing is that the extra scans help create a complete plan of the building. I then hide the scans where I don't want the public to see, especially garages where, in the case of some show homes, they are not a pretty sight. Chris

Matterport to GSV Beta - Wish List

DanSmigrod

8

3 yearsTrustedPhotoDC (1108): Just published this to test - 20 original scans 5 turned 'off' and 15 'on' http://148bcec7bb334341cd98-2fb779bd12ec72d4612275342f2c9187.r31.cf1.rackcdn.com/ad9ade61b531d75b7a3dfaf74d3d27ad.png 15 pucks appear in the Showcase 15 nodes are published to GSV http://148bcec7bb334341cd98-2fb779bd12ec72d4612275342f2c9187.r31.cf1.rackcdn.com/3c36c08e08e520525bcda9e6dcea71ce.png The constellation not yet imported and cleaned up in gothru.co (the...

Matterport to GSV: Hiden Scans in Workshop?

Chemistrydoc

5

3 yearsChemistrydoc (1371): I'm glad i asked the question! I think one of the ones i converted today had some hidden scans. I'll do an inventory and report back. KF

Does Workshop work on a Computer Stick?

Queen_City_3D

2

3 yearsMetroplex360 (9290): Eh... I wouldn't be so sure this would work. Workshop feels kinda slow for me on an Intel Core i7 3770... and I'm pretty sure that it's RAM intensive. Maybe the next version of Workshop... :)

Matterport beta test? Presented by?

DouglasMeyers

3

3 yearsMetroplex360 (9290): It's a public beta test of Showcase v3.0, which will be replacing Showcase v2.0 very very soon.

How to Shoot Great Snapshots with Matterport

DanSmigrod

4

3 yearsJonJ (1738): Here are some tips that I posted in another thread. clickable text

Sliding Highlight Reel

WarrenVandal

7

3 yearsWarrenVandal (19): Is there a parameter to make the walkthrough guided tour start automatically?

Can you duplicate model in workshop?

Queen_City_3D

5

3 yearsDanSmigrod (23401): @Queen_City_3D Seems like an up-sell opportunity, especially since the model needs to continued to be hosted? (Or, are you enabling them to download on their iPad?) Since I started with Matterport - July 2014 – I do not (believe) that you could ever duplicate a Matterport Spaces 3D tour in Workshop. Yes. Seems obvious that the backup/restore/duplicate/editing should be enabled in Matterport Workshop. You might add that to your wish list...

Can we get a 360 photo of a reguar MP Scan?

walk360

4

3 yearswalk360 (79): Great!!! I though that was only available for the pictures taken on the 360 mode!! thanks a lot for the great news ;) Have a great night!

Reshoot Content - Same Sharing Link

LMTLESS

3

3 yearsDanSmigrod (23401): @LMTLESS One of the benefits of using WP3D Models Wordpress Plugin is that you can keep the same URL - even though the Matterport 3D Tour URL changed. For example, We Get Around Atlanta typically delivers the Matterport Spaces 3D Tour the next morning to the client. That said, we may want to reprocess the model before we to MatterTags, Screen Grabs, etc. When we reprocess the Matterport 3D Tour - it does generate a new URL - but we...

Video>Creating a Matterport Walkthrough Tour

DanSmigrod

1

3 yearsDanSmigrod (23401): Hi All, This video demos how to create a Matterport 3D Walk Through Tour. https://youtu.be/3YcmZrueoNE Video: How to Create a Matterport 3D Walkthrough Tour | Video Courtesy of Royal Oak, Michigan-based REALTEAM Real Estate's Tommy Lower. This is one of the videos included in the We Get Around Network Training Academy curated content section. Best, Dan

Scan not aligning & panning direction

Riaan

2

3 yearsaristepp (58): I'd love an answer to your last sentence. I have read one explanation about controlling the pan direction. Can't say that it was helpful at all. I continue to work at understanding the machinations of the process so I can control it. Sometimes the pan works out exactly as I want it and other times I simply cannot win. Explanations welcome.

Workshop problem with huge model

alirizacil

4

3 yearsalirizacil (135): Thanks @Bale100 and @Olivius. Matterport support suggests same, I may need more memory space in my computer. Best regards... Ali

how to rename a Matterport floor

fotoguy

3

3 yearsfotoguy (659): You da best! Thank you!

How to delete a scan in Highlights Reel?

DanSmigrod

8

3 yearsDanSmigrod (23401): @RPOceanic Seems like deleting scans has gone away? Uploading the model twice would solve the puzzle, EXCEPT we are doing Snapshots twice (when all we wanted to do was hide some of them). Dan

Any processing/re-processing issues today?

DanSmigrod

3

3 yearsMarcelloM (63): Could be something "wrong" in the Matterport clouds (too much work?". It happened to me too and after a while it worked fine again.

Labels Showing Up on Wrong Floor in Workshop

DanSmigrod

5

3 yearsJC3DCX (823): It seems that the mesh is not "seeing" a floor or floors, when you place a label on a floor it just "drops" right through to the bottom floor... Maybe the MP Techies will have a solution. I have only had it with one of my models thus far. :-)

Matterport Workshop "Wish List" | Your list?

DanSmigrod

15

3 yearsDanSmigrod (23401): https://forum.we-get-around.com/cached/75739d41d5d0ed755282196699ee7f59.png @Queen_City_3D Yes. Accidentally - deactivating and activating - is a problem. Above is an example of where it is almost impossible to see the scans in Workshop. Dan

Error Saving Snapshot for a Disabled Scan

DanSmigrod

2

3 yearsron0987 (1507): I grab my photos and download them prior to turning the view points off and yes I wish they would also just separate the photos from the scan model and allow them stand alone. I do like you do, I scan from several extra positions either to get coverage or to extract photos from different points especially with the new camera. It would be a simple coding issue to allow this, it would be even a simpler question when you take the photo are you...

WGAN-TV Training Academy Video: Workshop 101

DanSmigrod

7

3 yearsJTR (10): @dansmigrod Hi Dan, Could you please PM the password for the workshop. Thanks!

changing Matterport hero image

fotoguy

4

3 yearsMarcelloM (63): Hello Intellidrone, is it possible to "hide" or "erase" the hero image since it disturbs the downloading sequence. Thank you!

URGENT: Matterport Workshop Not Loading

DanSmigrod

22

3 yearsmori (775): Have also experienced some issues. maybe more important: the platform seems to show issues on reuploads and duplicates and adds these when renamed or corrected as new spaces and I guess MP wants to charge them. I am really worried about MP future when I have a closer look at their development speed, quality of code & platform services. Looks like they get a 2nd Soundcloud. Soundcloud is a bad example showing how fast 100 millions...

Matterport Workshop 101 Free Online Training

DanSmigrod

17

3 yearsDanSmigrod (23401): Hi All, The video is ready now ... ✓ WGAN-TV Training Academy Video: Workshop 101 Dan P.S. At the airport waiting for a flight. If you PM me, I likely will be slow to reply.

MP Highlights Reel Slide Show or Walkthrough

DanSmigrod

8

3 yearsGhagendorf (306): I prefer walk throughs over slide show. If it is a large house I will have the walk through go long distances (vs every 6 feet) to speed it up. I prefer walk throughs that show the highlights of the house, not everything. Let people go back and take a self guided tour to see the rest.

uploading to Matterport for the first time

fotoguy

7

3 yearsDanSmigrod (23401): @fotoguy TY for joining as a Standard Member. I will follow-up with an email ... Dan

Matterport Workshop x 2? Ugh!

StevenHattan

12

3 yearsMetroplex360 (9290): @aristepp I use a PC for work, MacBook for pleasure :) My MacBook is an aging Cadillac.

Matterport WILL include SQFT/M2 in Workshop

Metroplex360

10

4 yearsAlex_iGuide (358): @Gothru 1. Upload your floor plan to floorplanner.com (you can upload a background image). 2. Set scale (use Workshop to make a reference length measurement). 3. Draw a polygonal surface that covers the footprint you need measured and it will have square footage displayed.

More Matterport Stats, Analytics & Reports?

PHILG

7

4 yearslisahinson (785): @metroplex360 Exactly what is the Avg Scan Visits referring to on the MatterStats? thx

Matterport Workshop: Could Not Re-Publish

Helen

8

4 yearsJamie (1848): Just for your own knowledge you should reupload and try the chanfe that isn't working, see if that actually fixes it.

Uploading New Scans to existing model

Jamwoc

10

4 yearsGarySnyder (1822): No, as long as it's the same model there's no additional charge. Just remember that once you have a model you're happy with you should delete the other models you've uploaded to your My-Matterport account as these will count to you total models hosted.

Hide / Show Scans

srennick

5

4 yearsfrstbubble (604): I just thought it was me being clumsy.

WORKSHOP Problems

srennick

9

4 yearssrennick (351): @invelope it took Matterport almost a week to get back to me. 3 browsers with 3 different sets of issues. Chrome is fixed at the moment. Their engineering team is looking at Safari and Firefox. I needed to screen record opening up and accessing workshop while exposing the console (developer view) so they could get a good look at what was going on. I'm still waiting for results.

Matterport Workshop ?

JMEPhotos

4

4 yearsfrstbubble (604): @JMEPhotos If you duplicate and upload a model it will change. Say you delete some scans or find you need to add a scan. There are two workarounds to ensuring the client will not have to change a link on their end. 1. use WP3D Models. You then change the link in there and link provided to the client is to the WP3D models. It is a great WP plugin. 2. Use a URL shortener. When you update a model then all you do is change it in the shortener...

Matterport Workshop Support Chrome and Edge

DanSmigrod

5

4 yearsVince_MccrayT (4): The reality is that Firefox will lag behind Chrome by 6 months to a year, requiring extensive pollyfills. Edge will be missing so many APIs you won't be able to support it however hard you struggle. You'll be forced to abandoned the utopia of "run everywhere" yet again, and declare Edge (along with Safari) are the new IE6.

Download All Snapshots from Workshop

danmorell

4

5 yearsdanmorell (73): Thanks @htimsabbub23! & @rpetersn!

Adding collaborators to Matterport

PetraSoderling

5

5 yearsPetraSoderling (752): Thanks for replies @stevenhattan @jamie @3dscannUK Steven: I'd love to try how that works. I'll send you PM. 3DscannUK: That's a good solution, too. One of my clients is already doing this. I would rather have something that just works without the need for me to bother you guys but I guess there is not much hope getting Matterport to change their ways. Have a great Wednesday everyone.

List of Matterport iFrame Embed Code Tips

DanSmigrod

6

5 yearsShane (91): The links above have expired for what ever reason but the following links have the same useful information. https://support.matterport.com/hc/en-us/articles/215202587 https://support.matterport.com/hc/en-us/articles/209980967-How-can-I-customize-viewing-of-my-embedded-models-

Workspace access

Bill

5

5 yearsBill (285): Hey Dan, Even though you can give access to one folder that collaborator can still click on "All Collaborators" and then click on each one individually. I'll PM you.....

Matterport Workshop 2.1 "Wish List"

DanSmigrod

11

5 yearsrpetersn (1998): Hey Josh...have you seen the WP3D Models tool that was built to make it easy to download a ZIP file that includes all of your snapshot images? Its free and you can find it here: http://zip.wp3dmodels.com

MUG Feedback: Google Chrome + 3D Workshop

DanSmigrod

3

5 yearsal9901 (61): This isn't the end of the world; most Matterport service providers will do any workshop features themselves. Most realtors don't have time or patience to use the workshop. It is fairly easy to swtich browsers, even if that means using Windows Evil Explorer. To be honest, I haven't found anything worthwhile to sell the workshop on. It would be much better if you could take measurements from the photo showcase, then users that were really...

Workshop 2 Bugs (and Work-Around)+ Problem

DanSmigrod

9

6 yearsTim (355): Yep, had done before this post. Cheers