59414 3 3
|DanSmigrod private msg quote post Address this user|
Video: How I Matterport with @Metroplex360 Chris Hickman: Bathroom Mirrors | Video curtesy of Metroplex 360 YouTube Channel
This short-sweet-smart-dash-of-humor how to video - Bathroom Mirrors - is by @Metroplex360 Chris Hickman.
The video is from this WGAN Forum discussion that includes more videos by Chris.
I posted it separately from the other videos, in case you want to discuss/share Matterport scanning in bathrooms.
Got a tip, question or video on how to scan a bathroom, please post to this discussion.
P.S. Related WGAN Forum posts are tagged: How I Matterport with Chris Hickman
|Post 1 IP flag post|
|Walkabout private msg quote post Address this user|
|@DanSmigrod @Metroplex360 so treat mirrors like you do your women "find the sweet spot" ;-)
Love it thank you
|Post 2 IP flag post|
|Metroplex360 private msg quote post Address this user|
I have seen many scans where there's not a 'sweet spot' so to speak -- but usually in bathroom situations, if you're taking your job seriously and not just holding contempt to the space that you are in, you will find places where you can place the camera out of the line of fire created by multiple mirrors.
Seeing the Matterport Camera in a mirror is my pet peeve -- and SO MANY PEOPLE DO IT. So many people believe that it is acceptable, and it's not. If you are going to invest in an expensive camera that does not allow post editing, then you should do the best you can work with your environment.
I had the pleasure of having a Realtor call me and hire me for a scan last week because he viewed a large number of scans on my website to see if I had camera reflections in mirrors. He had ordered a scan from another MSP in the area and the camera was reflected in multiple mirrors and was told that that's normal.
And a side note -- if you do scan in front of a mirror in the attempt to complete your mesh or access an area beyond a mirror, you do face the risk of having the Matterport camera reflected in the MESH, which is even more awkward as you can hide a scan -- you cannot control the imagery that is applied to the mesh unless you surgically remove scans from Capture after the tour is complete and reupload hoping for the best.
So yes, I found the sweet spot
|Post 3 IP flag post|