Connecting 3D/360° Virtual Tour Buyers to Service Providers powered by
the Most In-Depth, Relevant and Up-to-Date Content and Training for the 3D/360° Community
Join FREE! 50+ Benefits
Find a 3D Tour Photographer Map
We Get Around Network Find a Pro Service
Matterport Service Provider? Join We Get Around Network
for WGAN Forum Members
Engage an EyeSpy360 Service Provider to
Shoot, Create and Publish the tours for you.
One Order  |  One Quote  |  One Contact
Book Multiple USA Commercial Locations
  • ✔  As-Builts
  • ✔  Construction Progress
  • ✔  Facillities Management
Last 30 Days: 58,908 Page Views | 14,942 Visitors | 128 New Members
WGAN Knowledge Base | Total Posts: 64,348  |  Total Topics: 10,129
5,642 WGAN Members in 130 Countries
We Get Around Network Forum
WGAN-TV Training U in Matterport
WGAN-TV: Now Playing
3DVR: Fast-Start Websites for Matterport
Service Providers with Angus Norriss
WGAN-TV: Coming Up
Live at 5
Live at 5 (5 pm EST | GMT -5)
Wednesday, 29 January 2020
Add to My Calendar WGAN-TV Program Schedule | Need Help? | Podcast

Continuation of a scan6601

Briski2208 private msg quote post Address this user
I have completed a scan of a guest house, as yet not uploaded. I scanned the ground and 1st floors. The owner would like the private area of the guest house done which is adjoining to the guest house by a ground floor passage/doorway. Im assuming you may continue on the original scan but will i encounter issues ie like going up to another 1st floor?
Post 1 IP   flag post
Queen_City_3D private msg quote post Address this user
You can certainly adjoin the spaces as long as you have scanned a path from one area to another the whole way where the camera recognizes itself in space.

Having said that... one thing I haven't heard anyone try, and I'm curious if it work is this:

What would happen if you scan a path of connectivity from one area to another and then use trim lines to cut out the connective path? I'm wondering if it would then have the 2 areas with black in between, or if that would cause the model to fail.

Anyone try this?
Post 2 IP   flag post
HarlanHambright private msg quote post Address this user
It only ignores 3d data. The photo stuff remains. How would you navigate between however without the link in showcase?
Post 3 IP   flag post
Queen_City_3D private msg quote post Address this user
If it worked where you had the 2 scanned locations as separate “islands” in the 3D tour I would suspect you could get from one to another via pulling out to dollhouse view and then clicking on the other location to enter into it.
Post 4 IP   flag post
ron0987 private msg quote post Address this user
@Briski2208 you also have to make sure that if there is a door joining the two spaces it was open during original scan or you will need to scan far enough away from the door or you will not be able to navigate thru it. You will have no issue even if there is a separate stair case, I just add a new level and have never had an issue.
Post 5 IP   flag post
Briski2208 private msg quote post Address this user
Update: The revisit and additional scan worked fine. The only issue I had is a little bit of distortion due to being 20 mirrors in one room.
Post 6 IP   flag post
ron0987 private msg quote post Address this user
Great I am glad it turned out, short of the mirror issue. Thank you for the update.
Post 7 IP   flag post
65170 7 7
This topic is archived. Start new topic?