Connecting 3D/360° Virtual Tour Buyers to Service Providers powered by
the Most In-Depth, Relevant and Up-to-Date Content and Training for the 3D/360° Community
Join FREE! 50+ Benefits
Should I buy a Camera? Quiz How Much to Start 3D Tour Business? Calculate How Much Can I Make as a Pro? Calculate Win More Listings? Calculate
Option #1
Find a 3D Tour Photographer Map
We Get Around Network Find a Pro Service
Matterport Service Provider? Join We Get Around Network
Option #2
Book a Matterport Pro in 60 Seconds
We Get Around Network Instant Booking Service
Powered byKoaWare
Matterport Service Provider (USA)? Join KoaWare Free! Register Now
Last 30 Days: 47,261 Page Views | 12,050 Visitors | 68 New Members
WGAN Knowledge Base | Total Posts: 60,857  |  Total Topics: 9,436
5,236 WGAN Members in 129 Countries
We Get Around Network Forum
WGAN-TV Training U in Matterport
WGAN-TV Channel
Matterport Capture and 3D Showcase Apps
Demo and Discuss with Matterport's Amir Frank
WGAN-TV Training U
19 Subject 'Matter' Expert Instructors
25+ Courses | 11+ Major Topics
Training via Recorded Videos
More Info WGAN-TV Program Schedule | Need Help? | Podcast
Bad ScanProblemScanningStrange Lines

Bad reflection strange lines6596

4dlegacyvision private msg quote post Address this user
Is there a way to fix this
Post 1 IP   flag post
4dlegacyvision private msg quote post Address this user
[matterport]http://https://my.matterport.com/show/?m=SWtjPiwTQd6[/matterport]
Post 2 IP   flag post
4dlegacyvision private msg quote post Address this user
https://my.matterport.com/show/?m=SWtjPiwTQd6
Post 3 IP   flag post
immersivespaces private msg quote post Address this user
It's caused by the reflective floors. The laser is projecting past the reflective surface. You can try dimming the interior lights a little. That should at least reduce the refraction but probably won't eliminate it entirely. I had a similar thing happen with a house that had polished white solid surface floors. I turned off all the overhead lights and just used the ambient light in the room and that reduced the effect quite a bit.
Post 4 IP   flag post
4dlegacyvision private msg quote post Address this user
I canton rescan as the client has left the motorshow
Post 5 IP   flag post
immersivespaces private msg quote post Address this user
Unfortunately, I don't think there is a way to fix it after the fact.
Post 6 IP   flag post
4dlegacyvision private msg quote post Address this user
Even so during a international show there ils no way to turn off those lights. Hope i dont lose the client over this issue
Post 7 IP   flag post
Shakoure private msg quote post Address this user
@4dlegacyvision ...Future reference: Take an extra scan or two a foot apart from a scan you think might have reflective problem like this. Sometimes, the second scan at just a foot away can render a better image which you can use and Hide the problematic one.
Post 8 IP   flag post
sbl110 private msg quote post Address this user
I know it's easy for me to say, but I wouldn't worry about the floor. I looked at the whole tour and didn't find the reflective floors distracting at all. I was focusing on the amazing vehicles on display. Nice touch that you were able to do a scan inside. Overall, if I were the client, I'd be very satisfied. Nice work!

As for Shakoure's suggestion of extra scans for potentially reflective areas, it's a great idea, but you may not realize the problem until after the space has been rendered, at that point it may be too late to add scans. I know you can preview a scan in low-res mode, but that takes time which is usually used for trimming and adding windows and mirrors. It would be great if there was a low-res version of the tour you could view before uploading for a final rendering.

Scott
Post 9 IP   flag post
61605 9 9
This topic is archived. Start new topic?
destitute