Connecting 3D/360° Virtual Tour Buyers to Service Providers powered by
the Most In-Depth, Relevant and Up-to-Date Content and Training for the 3D/360° Community
Join FREE! 50+ Benefits
Should I buy a Camera? Quiz How Much to Start 3D Tour Business? Calculate How Much Can I Make as a Pro? Calculate Win More Listings? Calculate
Option #1
Find a 3D Tour Photographer Map
We Get Around Network Find a Pro Service
Matterport Service Provider? Join We Get Around Network
Option #2
Book a Matterport Pro in 60 Seconds
We Get Around Network Instant Booking Service
Powered byKoaWare
Matterport Service Provider (USA)? Join KoaWare Free! Register Now
Last 30 Days: 47,554 Page Views | 11,908 Visitors | 81 New Members
WGAN Knowledge Base | Total Posts: 60,267  |  Total Topics: 9,325
5,183 WGAN Members in 129 Countries
We Get Around Network Forum
WGAN Training Academy (Learn more)
WGAN-TV Channel
Intro 101 to Matterport for Pro Photographers
with Matterport's Jonathan Buckley and Amir Frank
WGAN-TV: Coming Up
Live at 5
5 pm EDT (GMT -5)
Tuesday, 27 August 2019
Add to My Calendar WGAN-TV Program Schedule | Need Help? | All Videos
BrokerBruce private msg quote post Address this user
Just did my first scan of one of my current listings. Success! Issues I had were stairs. I had seen where you should work your way up steps. Couldn't get an alignment going up. I then started on the landing which only has 3 steps into the living areas. When I got the scan back the stairs showed fine goin down and then to front door. It's about 11 steps to the landing. I also had some difficulty in setting the tripod securely on the steps. Any suggestions?

When I went to label the floor plan I would get the first label placed ok but when I went to put the second it would change back to the first.

Any tips would be greatly appreciated!
Post 1 IP   flag post
JohnLoser private msg quote post Address this user
Congratulations on completing your first scan.

Steps can be challenging. Start with this rule: Steps belong to the floor where they start to go UP. So a flight of stairs going from the first floor to the second floor "belong to" the first floor.

I have found that one can usually go up three steps from scan to scan. (Matterport suggests four steps.) Be certain 1.) that you can still see something from the previous scan and 2.) there are sufficient differences in what the camera sees so it can align from one scan to another.

The standard "rise" on a stair in the USA is 7" and the tread is 11", so you will go up about 21" and "forward" about 33" for each scan.

I have discovered that "open stairs" can cause misalignments as well because the camera can see the lower level as you climb up, and it won't assign the stairs properly in the final model.

As for using the tripod on stairs: Put the legs on two stairs, about three stairs apart. Two legs go on the lower stair, one on the higher stair. Level the camera and scan. Then, as you move up, the two legs go where the one leg was.

I hope this helps you.
Post 2 IP   flag post
BrokerBruce private msg quote post Address this user
Thanks John!
Post 3 IP   flag post
61007 3 3
This topic is archived. Start new topic?