Connecting 3D/360° Tour Buyers to Service Providers powered by
the Most In-Depth, Relevant and Up-to-Date Content for the 3D/360° Community
Join FREE! 50+ Benefits
Should I buy a Camera? Quiz How Much to Start 3D Tour Business? Calculate How Much Can I Make as a Pro? Calculate Win More Listings? Calculate
Option #1
Find a 3D Tour Photographer Map
We Get Around Network Find a Pro Service
Matterport Service Provider? Join We Get Around Network
Option #2
Book a Matterport Pro in 60 Seconds
We Get Around Network Instant Booking Service
Powered byKoaWare
Matterport Service Provider (USA)? Join KoaWare Free! Register Now
Last 30 Days: 53,737 Page Views | 12,673 Visitors | 90 New Members
WGAN Knowledge Base | Total Posts: 58,904  |  Total Topics: 9,012
5,023 WGAN Members in 126 Countries
We Get Around Network Forum
WGAN Training Academy (Learn more)
WGAN-TV Channel
Matterport Workshop 3.0 Training for Newbies
Part 5 with Matterport Marketing Mgr. Amir Frank
Matterport Training Academy
60+ Hours | Succeed Faster
Matterport Scanning | Matterport Workshop 3.0
Private Message @DanSmigrod for free ...
Subscribe Now WGAN-TV Program Schedule | Need Help? | All Videos

Help: Overlay on Floorplan.Pictures attached608

Grant private msg quote post Address this user
On the top floor on the floor plan view it shows a part of the main floor.

Here is the top floor:

Here is the main floor:

I am not sure what to change to make this correct...
Post 1 IP   flag post
Jamie private msg quote post Address this user
Duplicate it and see if it's still the same.
Try creating an additional floor and moving the top level scans to the new floor and then delete that top floor. (on the duplicate)
Post 2 IP   flag post
Grant private msg quote post Address this user
Will do, Thanks @Jamie
Post 3 IP   flag post
ron0987 private msg quote post Address this user
I cannot tell, but did you complete the trim lines to completely enclose that section. It does not appear to be complete. I had a similar issue which corrected it self once I closed the trim lines.

Post 4 IP   flag post
ron0987 private msg quote post Address this user
Grant, did you figure out what the problem was.

Post 5 IP   flag post
Grant private msg quote post Address this user
@ron0987 Yep, I duplicated it and moved the scans to the new floor as @Jamie recommended. Turned out fine.

Thanks for the replies.

I was looking at the trim or markings at first, but the only one in the problem area was a window marking. That did line up with another window perfectly on the main floor and top floor.. Don't know if that had any effect or not.
Post 6 IP   flag post
ccctucker private msg quote post Address this user
Is the top floor a loft that may overlook the maim floor? If so, you would just move the cutoff lines around the portion of the scan that you want on the main floor.

Another thing is to complete the trim lines around the entire floor, it looks like you only covered windows, and mirrors. That will also help clean up stray points that appear in the dollhouse mode. I will normally put a complete box around it. See example

Post 7 IP   flag post
59615 7 7