Connecting 3D/360° Virtual Tour Buyers to Service Providers powered by
the Most In-Depth, Relevant and Up-to-Date Content and Training for the 3D/360° Community
Join FREE! 50+ Benefits
Option #1 - Find a 3D Tour Photographer Map
We Get Around Network Find a Pro Service
Matterport Service Provider? Join We Get Around Network
Option #2 - Book a Matterport Pro in 60 Seconds
We Get Around Network Instant Booking Service
Powered by Koaware. Matterport Service Provider (USA)? Join KoaWare Free! Register Now
Last 30 Days: 49,512 Page Views | 12,539 Visitors | 78 New Members
WGAN Knowledge Base | Total Posts: 61,614  |  Total Topics: 9,586
5,318 WGAN Members in 129 Countries
We Get Around Network Forum
WGAN-TV Training U in Matterport
WGAN-TV Channel
How to Make Money in the AEC Space with
Matterport with MSP ToPa 3D CEO Paul Tice
WGAN-TV: Coming Up
Thursday, 7 November 2019
Live at 5 | 5 pm ET (GMT -4)
Tomer Poran, Director, Business Dev., Head of Partnerships and New Market Development
More Info WGAN-TV Program Schedule | Need Help? | Podcast
LargeLarge SpaceLarge Spacesproblem

Large venue alignment problems - please help5896

virtuallyreal private msg quote post Address this user
Hi folks,

Any help and advice gratefully appreciated!

Trying to scan this venue. As you can see from the captures, we've gone around the 'south' side of the venue, up the 'east' wall, along the 'north' wall.... we actually then completed the 'west' wall but could not get the capture app to align.

You can see from the pictures that the grey large squares on the floor are square, but are distorted in the capture app - the whole room kinda splits open.

How can we solve this? The guidance for large spaces suggests going around the perimeter which is what we've done. I'd hoped the space was irregular enough for the camera to maintain alignment but unfortunately not.

We've got one more shot at this tomorrow (if we're lucky!) so any thoughts gratefully appreciated!

Post 1 IP   flag post
WGAN Forum
DanSmigrod private msg quote post Address this user

While I have not tried this solution, seems like it is exactly what you need:

Matterport AprilTags for empty or repetitive

Please also check these WGAN Forum discussions tagged: Large

Hopefully, other Members of the WGAN Forum will have some ideas for you too.



P.S. Just heading into an appointment ...
Post 2 IP   flag post
E3Media private msg quote post Address this user
I had a very similar issue with a slightly larger venue, I ended up duplicating the model, then deleting scans until the model “looked right” then I added a chair to the scan to fill in the central section. I ended up having to move and reuse the chair a few times. The end result still didn’t align perfectly. The team at Matterport fixed the final alignment for me.
Post 3 IP   flag post
3dVuz private msg quote post Address this user
You should do some inside ones too. Scanning along the perimeter only might be a problem. And if you upload as is, it might even straighten itself out.
Post 4 IP   flag post
jasondavidpage private msg quote post Address this user
I'd suggest trying the AprilTags or scanning in rows from one end to the other instead of scanning along the perimeter. When you create a loop, all of your scans hinge on a single point and the scan almost always opens up like a zipper.
Post 5 IP   flag post
virtuallyreal private msg quote post Address this user
Hi all,

Thanks for your suggestions - all gratefully recieved.

This is our plan - @jasondavidpage similar to what you suggested but with a bit mixed in from other suggestions - we're going to add in some objects in the middle of each square to help the camera align.

Post 6 IP   flag post
VTLV private msg quote post Address this user
I got the same issues going around a large venue. Seems like every update either takes you 2 steps forward or 5 steps back.

This update, 5 steps back. Nothing aligns.
Post 7 IP   flag post
62369 7 7
This topic is archived. Start new topic?