Connecting 3D/360° Virtual Tour Buyers to Service Providers powered by
the Most In-Depth, Relevant and Up-to-Date Content and Training for the 3D/360° Community
Join FREE! 50+ Benefits
Find a 3D Tour Photographer Map
We Get Around Network Find a Pro Service
Matterport Service Provider? Join We Get Around Network
Book a Matterport Pro in 60 Seconds
We Get Around Network Instant Booking Service
Matterport Service Provider (USA)? Join KoaWare Free! Register Now
One Order  |  One Quote  |  One Contact
Book Multiple USA Commercial Locations
  • ✔  As-Builts
  • ✔  Construction Progress
  • ✔  Facillities Management
Last 30 Days: 54,898 Page Views | 13,167 Visitors | 106 New Members
WGAN Knowledge Base | Total Posts: 63,124  |  Total Topics: 9,891
5,468 WGAN Members in 129 Countries
We Get Around Network Forum
WGAN-TV Training U in Matterport
WGAN-TV Live at 5
3DVR: Fast-Start Websites for Matterport
Service Providers with Angus Norriss
WGAN-TV: Coming Up
Live at 5
5-6 pm EST (GMT -5)
Thursday, 12 December 2019
Ask Your Question On-Air WGAN-TV Program Schedule | Need Help? | Podcast
Basic
Member
RPOceanic private msg quote post Address this user
Shot a 3400 sq ft vacation rental yesterday w/ a short window between guests to get in/out. Hammered out over 100 scans in 2 hours but... with a cost. There are issues. Owner wanted exterior shots- particularly the roof/upper deck with views.

You can go in the front door, but problems going back out. Sure it needs a scan or 2- one on the threshold one stairs. Few other spots with gaps.

Biggest issue in the tour is roof/exterior. I shot at dusk. Had scan that wouldn't stick, but got some that did. Well... the walkthrough occasionally freezes up/spinning wheel o death. Always does going up the stairs to the roof. Have issues- sometimes can sometimes can not get there even in floor plan getting there. I have a small window to go back in a few hours. Will reshoot entire roof at dusk.

Suggestions are welcome!!!! Particularly regarding the upper deck and its probs.
clickable text

Post 1 IP   flag post
DouglasMeyers private msg quote post Address this user
Be Careful of your trims.

After that its kinda hard to tell whats really going on.

Good Luck
Post 2 IP   flag post
Basic
Member
RPOceanic private msg quote post Address this user
Thanks D.... any particular issue w/ trims you see or a general piece of sge advice? I've adjust some, have an upload cooking. Through together a quickie walkthrough tour to what's going on before my shoot. Planning to make a duplicate and shoot roof. Right approach?
Post 3 IP   flag post
StevenHattan private msg quote post Address this user
You have a lot of needless scans in your tour. Feel free to reach out direct if you'd like to discuss further.
Post 4 IP   flag post
Basic
Member
RPOceanic private msg quote post Address this user
I re-uploaded the model. Cooking a second time appears to have resolved a great deal. PMed you Steven. I'm ALWAYS open to feedback/looking to learn.
Post 5 IP   flag post
63918 5 5
This topic is archived. Start new topic?
destitute